Touch; Sustain; Pitch Bend; Modulation - Medeli A300 Owner's Manual

Playing Voices

Touch

The instrument is equipped with a touch response feature that lets
you dynamically and expressively controls the level of the voice with
your playing strength just as on an acoustic instrument. The piano has
3 touch types to choose.
1.
Holding down [SHIFT] button and then press [TOUCH] button to
enter touch settings. The LCD displays the touch setting number.
The default number is 2.
2.
Choose a touch type.
When the LCD displays touch setting, using [+/YES]/ [-/NO] or data
dial or holding down [SHIFT] button, and then pressing [TOUCH]
button can change touch type. Pressing [+/YES] and [-/NO]
buttons simultaneously will set touch value to default setting:
2(normal).
3.
Turn the touch function off.
If the value is set to OFF, that means no touch response to
keyboard.

Sustain

1.
Press and hold the [SHIFT] button and then press the [SUSTAIN]
button to start sustain function.
All notes will sustain even after releasing the keys.
2.
To stop the sustain function, press the [SUSTAIN] button again.
Note:
If you want a better sustain effect, we recommend you using a sustain
pedal. (Refer to pedal function for more details.)

Pitch Bend

Use the pitch bend wheel to bend notes up (roll the wheel away from
you) or down (roll the wheel toward you) while playing the keyboard.
The pitch bend wheel is self-centering and will automatically return to
normal pitch when released. You can use the pitch bend wheel to
imitate the guitar, violin, saxophone, urheen, suona and other
instruments pitch bend effect, make your performance more vivid.

Modulation

The Modulation function applies a vibrato effect to notes played on
the keyboard. This is applied to all the keyboard parts. Pressing the
[MODULATION] button to add modulation effect and releasing
[MODULATION] button to stop modulation effect. This modulation
effect is very important to those performances with urheen, guitar, and
violin these string instruments, make your performance more vivid.

Transpose

Transpose function allows the overall pitch of the instrument to be
transposed up or down by a maximum of one octave in semitone
increments.
1.
Holding down [SHIFT] button, and then press [TRANSPOSE]
button to enter transpose settings. LCD displays the current
transpose: xxx Transpos.
2.
When LCD displays the current transpose, use [+/YES]/ [-/NO] or
data dial to change transpose value. The max transposes is±12
semitones.
3.
Press [+/YES] and [-/NO] simultaneously will set the transpose
value to its default setting: 000 Transpos.
Note:
1. If you want to play song in G key, you can set the transpose to -05
or 007, and then you can play the G scale using C scale keys.
2. Transpose setting is applied to all part of the music and keyboard.
12
aw_A300_Manual_G05_131121
2013 11 21 16:34:24
SHIFT
M6
TOUCH / NO / YES
Touch
Touch
SHIFT HARMONY
SUSTAIN
MIXER
SHIFT
TRANSPOSE
Transpos
/ NO / YES
100
95
75
25
5
0