Sirius Satellite Radio Stiletto 2 Installation And User Manual page 63

SIRlusii
SATELLITE RADIO
Cable Separation and
Routing Instructions
FCC Information
The satellite antenna cable, FM extender antenna (FEA) cable and cigarette lighter adapter (CLA) power
cable must be appropriately separated and routed for your radio to be compliant with federal regulations.
Step 1
Line Out
Figure 1
Power
The connectors on your vehicle
dock are clearly marked. Install
your vehicle dock and connect
the satellite antenna cable into
the connection labeled "ANT," the
CLA power cable into the power
connection marked "POWER", and the
FEA cable into the connection marked
"FM" (Figure 1).
Step 2
It is important that you keep the 3
cables as separate from each other as possible and that you keep the two antenna cables away. from
the vehicle dock and the CLA power cable. The cables must not be bundled together as they exit the
dock (Figure 2).
As a Quide, you can follow the diagram shown in Figure 2. Adapt the example to suit your own vehicle's
configuration. For example, if your cigarette lighter socket is to the left of the vehicle dock, route the two
antenna cables towards the opposite side of the vehicle (towards the passenger side.) If your cigarette
Iiqhter socket is on the right hand side, route the two antenna cables to the opposite side of the vehicle,
towards the driver's door. The CLA cable and antenna cables MUST be routed in opposite directions.
Safely conceal all antenna cables within door, carpet or dash panels to prevent snags and interference
,
(Fiqure 2).