Sirius Satellite Radio Stiletto 2 Installation And User Manual page 33

to locate an FM channel that is not broadcasting in your area. If you use an FM channel
that is being used by a local broadcaster, it will interfere with the performance of your
SIRIUS radio. Once you have located an FM channel that is not broadcasting in your
area, save it as a preset on your vehicie radio. This will become your SiRiUS prc:;f;1.
2. Power the Stiletto 2 on. When it is completely powered up, press the
fl',
FM outton on
the left side of the vehicle dock or press the
.»
FM button on the remote control.
3. Use the
0
Media Dial or the
~ ~
buttons on the remote control to seiect the same FM
channel. (Figure 18) Press and hold a preset number (0-9) on the vehicle dock
In
which
you want to store the selected FM channel as a preset. (Figure 19) Press the. Sclec!
button to exit and transmit on the selected FM channel. The Stiletto 2 wiii transmit on thr·
selected FM channel.
1 - - - - - - ·'-- '-"-.
I
FM Transmit I
, I
!
Turn the Media Oiai to
!
I
·
change the frequerlcy.
, Use {he number keys to
I
recail or assign FM
presets.
I
I
!
90.1 .
I. •
I • :
l
~
.
J
Figure 18
r-' ---- - - - - - - --
~-
--
-_.~,.-
....
FM Transmit
Turn
the Meoia Dia: to
change the
~requency.
U5e the number key5
:0
recail or assign FM
presets.
!
i
901
! •
•
L__. .._ . . _ _ .
J
Figure 19
Note:
The FM transmitter in your SIRIUS radio is automatically set to FM channel 88.1.
This may not be the best channel in your area.
Tip:
If you regularly travel between cities with different active FM channels, you may
need to find channels that are not broadcasting in each city. The Stiletto 2 can store
multiple FM transmit channels as presets, so you can easily switch to the best FM
channel for each city. You will also want to set the FM channels that are
no1
broadcast-
ing in each city as presets on your vehicle radio.
You should now hear the audio from your SIRIUS radio over your vehicle's FM radio. If the
audio quality is not satisfactory, you should install the FM Extender Cable as
descr!b(~d
In
thp
following section (or use a direct connection as described on page 48).
33