Sony Bravia KDL-52XBR7 Operating Instructions Manual page 11

Item
[I]
VIDEO IN 1
S VIDEO
VIDEO IN 2/3
VIDEO/L(MONO)-
AUDIO-R
[2J
COMPONENT IN
1/2 (1 080pl1 080il
720p/480p/480i)1
L-AUDIO-R
~ PCIN
(RGB/AUDIO)
Description
Connects to the S VIDEO output jack of video equipment. If both composite video and
S VIDEO are connected, S VIDEO signal has priority.
Connects to the composite video and audio output jacks on your NY equipment.
~
• If you have mono equipment, connect its audio output jack to the TV's L (MONO)
audio input jack.
Connects to your equipment's component video (YPSPR) and audio (LIR) jacks.
Connects to a personal computer's video and audio output connector (see page 14). Can
also be connected to other analog RGB equipment. See "PC Input Signal Reference
Chart" on page 14 for the signals that can be displayed.
•
~
• For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If this is the case, connect the adapter to the computer before connecting the
HDI5-HDI5 cable.
• If the picture is noisy, flickering or not clear, adjust
Phase
and
Pitch
of
Screen
settings on page 45.
- - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - ~ - - - -
[4]
HDMIIN
1/2/3
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped NY equipment. HDMI
supports enhanced, or high-definition video, plus digital audio.
HDMIIN
4
R-AUDIO-L
lID
LAN
(10/100)
[§]
DMexl
SERVICE
- - - _ .
[l]
DIGITAL AUDIO
OUT (OPTICAL)
lID
AUDIO OUT
(VAR/FIX)
ill]
DMPORT
[Q]
CABLEt
ANTENNA
[j]
USB
[12J
AC IN
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the
HDMI IN 4 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the
AUDIO IN (L/R) jacks of HDMI IN 4.
~
• Be sure to use only an HDMI cable that bears the HDMI logo.
• When connecting a DVI-equipped PC to an HDMI jack, also connect an Audio cable
between the PC and R-AUDIO-L jack.
Connects to a Local Area Network using an Ethernet cable. You can use this connection
to connect to a network, receive software updates and enjoy photos from the Internet (see
page 30).
This USB port is for service only unless you are connecting the optional BRAVIA
external module (DMe
x ).
Connects to the optical audio input of your digital audio equipment that is PCM/Dolby*
Digital compatible.
Connects to the left and right audio input jacks of your analog audio equipment. You can
use these outputs to listen to your TV's audio through your stereo system.
Connects to devices via a DIGITAL MEDIA PORT interface (not supplied) and displays
photos or plays videos and music directly onto the TV from some DIGITAL MEDIA
PORT equipment. Some devices can be controlled with the TV's remote control (see
page 25).
RF input that connects to your cable or VHF/UHF antenna.
Connects to USB equipment to access photo files and music tiles (see page 29).
Connects to your power source. Connect the supplied power cord to AC IN and the
nearest wall outlet.
*
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
11