1
6.2 DVD TEST MODE
Before shifting to the test mode, please insert the "DISC".
A
Operate the equipment by turning ON the parking.
(2)
B
Slave Test Mode
DVD REGION DISP
DVD DEBUG DISP
C
DVD TOUGH DIRECT
D
E
F
140
1
2
(1)
(3)
AVIC-Z110BT/XN/UC
2
3
(1), (2) and (3) are invisible buttons.
Display the test mode screen by carrying out following
operations on this screen.
Press areas of (1), (2) and (3) long in order.
Detailed procedure
1. Display the source OFF screen.
2. Press the area of (1) long.
3. Press the area of (2) long.
4. Press the area of (3) long.
If the operations are completed successfully,
the screen shifts to the test mode screen after pressing (3) long.
The test mode is released by ACC-OFF operation.
In order to enter the DVD mechanism module test mode,
select "Slave Test Mode".
Switch the source to "DISC".
If you select the DVD source, the test mode screen
shown in the left figure is displayed.
Press "List" to display the list on the screen.
Operate the flow chart of the mechanism test mode
with buttons shown in the left screen.
Up to lists 01 to 08
3
4
4