Pioneer AVIC-Z110BT Service Manual page 136

1
32. Back Camera Test
Confirm the signal line for back camera image is valid.
A
"Back Camera Image" which was input from Camera Image Input Terminals at rear side of the product is displayed.
B
1. Display via DECORDER
C
This is the screen when back camera image is under display.
D
The following error message is displayed when error happens;
Case: Back Camera ON setting was unsuccessful.
In the case microcomputer communication was unsuccessful.
2. Display Directly
E
This is the screen when back camera image is under display.
F
The following error message is displayed when error happens;
Case. Failed to Setup BackCamera.
In the case microcomputer communication was unsuccessful.
136
1
2
AVIC-Z110BT/XN/UC
2
3
3
4
4