Xo XOV30S User Instructions page 22

FUSE
• The halogen lamps circuit is controlled
by a fuse 5x20 mm, 125V 5A. In case of
necessity it can be replaced only by spe-
cialized personnel.
• Replacing halogen light bulbs:
In order to replace the dichroic lamps,
carefully remove the lamp from the lamp
holder with the help of a small flat screw-
driver or a similar tool. PLEASE NOTE! In
doing this operation, please take care
not to scratch the hood.
Replace the bulbs with new ones of the
same type.
- 22 -