Phase Alignment; Gear (Cam L); Gear (Cam R) - Sony CDX-MP80 Service Manual

3-1. GEAR (CAM L)

• Align the gear (cam L) position setting hole with the center mark on
the bracket before screwing the motor block assy to the mechanism
chassis.
center mark
1 motor block assy

3-2. GEAR (CAM R)

1 Align the gear (cam R) position setting hole with the center mark
on the bracket before screwing the cam block assy to the
mechanism chassis.
2 Touch the gear (cam R) with fingers in the direction of rotation
and make sure that there is no phase difference with the R-side
position setting hole.
SECTION 3

PHASE ALIGNMENT

gear (cam L) position setting hole
gear (cam R) position setting hole
center mark
cam block assy
CDX-MP80
2 PTT 2.6x6
13