3-1. ARM (A-L) ASSY, ARM (B-L) ASSY
3-2. CAM (L)
1 Move the arm (B-L) assy in the direction of the
arrow A and the arm (A-L) assy in the direction of
the arrow B fully (full open state).
2 Align the hole (large) on the cam (L) with part C and
install the cam.
4 Turn the cam (L) clockwise and counterclockwise to
verify that both the arms are operated.
SECTION 3
PHASE ALIGNMENT
3 arm (A-L) assy
line
A
arm (B-L) assy
4 type-E stop ring 1.5
2 type-E stop ring 1.5
1 arm (B-L) assy
bracket (L) assy
3 type-E stop ring 1.5
hole (large)
C
arm (A-L) assy
B
CDX-M800
cam (L)
15