BenQ Joybook R46 Series User Manual page 57

7. Gently push the free edge downwards until the module locks
into place.
If the memory module is not installed properly, your Joybook
may not boot properly.
8. Replace the memory cover.
9. Use a screwdriver to secure the cover with the screws.
10.Place the battery on its original position (1), and then slide
"Battery retainer A" to the lock
power adapter. When you start the Joybook, it will
automatically test and configure the new memory.
It is recommended that you go into BIOS to load setup defaults
after installing additional memory. For details, refer to
BIOS setup" on page 41.
position (2). Connect the
Battery retainer A
"Using
Installing additional memory 53