BenQ Joybook R46 Series User Manual page 30

3. Click on the WLAN icon
at the lower right corner of the desktop to display a pop-up
menu.
4. From the pop-up menu, click Connect to a network.
5. Click Wireless in the Show list. A list of available wireless
networks will be displayed.
6. Choose a network and then click Connect. If security
authentication is not required by the network you are using,
there will be a successful message showing that you have
connected to the network.
• To connect to some networks that require security
authentication, you may have to undergo another
26 Using your Joybook
in the notification area located
authorization process and enter username and password. For
details, please consult your network administrator.
• For more information, refer to Help and Support in Windows
Vista.
• For data security, it is strongly recommended to connect to
security-enabled wireless networks whenever possible.
• When travelling by air, please be sure to turn off wireless
networking to avoid any possible risks to flight safety.
There are other ways for the Joybook to connect with a network.
See "LAN (Local Area Network) port (RJ-45 connector)"
"Modem port (RJ-11 connector)" on page
and
14.