PC-EFTPOS nab Reference Manual page 8

3.3
Dial-Up Modem
Equipment supplied with P66 Modem
 P66 modem
 Power supply and power cord
 PC connector cable (DB9 to RJ12)
 Dial-up phone cable and connector
Installation Steps:
1. Plug the power supply into a power point and the P66 Modem DIN connector,
2. Connect the phone cable to the "Line" connector on the P66 and to the phone line wall socket,
3. Connect the POS cable to the PC COM port and to the "Pinpad" connector on the P66 modem.
(Make sure you are using the P66 load cable and not the EFTPOS pinpad cable labelled "Ingenico CAB-0117-01")
Confidential
 One P66 Modem is required for any store that requires dial-up
connectivity to the bank. The P66 modem utilizes a purpose built
EFTPOS modem to connect with the banking network.
 The modem can be shared between any number of EFTPOS
terminals within a network.
 There should only be one P66 modem within any single store.
Page 8 19/02/09