Configuration Menu - Fema S40-T User Manual

Operating the Configuration Menu
To enter the "Configuration Menu" press the SQ button. The
"Configuration Menu" allows to change the configuration of
the instrument. Access to the "Configuration Menu" can be
password protected with the function "PASSWord". During
operation with the "Configuration Menu" the alarms remain
"frozen" and are kept on-hold. When leaving the "Configura-
tion Menu" the instrument performs a restart, and new con-
figuration is applied. During the restart of the instrument a
short alarm deactivation is performed.
Configuration Menu Tree - See page 6 and 7.
Description of Configuration Menu functions - See page
8 and 9.
Rollback - After 30 seconds without interaction from the
operator, the instrument leaves the "Configuration Menu",
discarding all changes.
Button SQ - Moves horizontally on the menu. Allows selec-
tion of the current option displayed. During a value selection
menu (for example a setpoint value) validates the value on
display.
Button UP - Moves vertically on the menu. Displays the
available menu options. During a value selection menu (for
example a setpoint value) increases digit value from 0 to 1,
2, 3, 4, 5, 6, 7, 8, 9.
Button LE - Leaves the current menu. Pressing LE several
times will leave all menus and leave the "Configuration Menu"
tree. During a value selection menu (for example a setpoint
value) allows to select each digit for modification with the
UP button.
Reset - Leaving the "Configuration Menu" forces a restart of
the instrument, even in case of no changes in configuration.
User's Manual S40-T
Input
Temp. Config,
FEMA ELECTRÓNICA - Page 6

Configuration Menu

Pt100/RTD 2 wires
Pt100/RTD 3 wires
Thermocouple J
Thermocouple K
Thermocouple T
Thermocouple E
Thermocouple S
Thermocouple R
Thermocouple N
Thermocouple C
Thermocouple L
Thermocouple X
Degrees
Pt100/RTD res..
Offset
Thermoc. CJC
On break
Alpha
Celsius
Fahrenheit
1º Resolution
0.1º Resolution
Offset counts
to add
Reading to high
Reading to low