Printer Test - Sharp XE-A101 Service Manual

5. PRINTER TEST

1) KEY OPERATION
5 PO
2) TEST PROCEDURE
With the above key operation , the print test pattern is repeatedly
printed.
Pressing any key will terminate the test after the completion of one
cycle print. (The receipt is issued at the end.)
6. CPU VERSION NO. PRINT
1) KEY OPERATION
6 PO
2) DESCRIPTION
The CPU version No. are printed with above key operation.
(Print example)
0101 CPU version NO.
06
This test is terminated when printing is completed.
7. BATTERY VOLTAGE SENSOR TEST
1) KEY OPERATION
7 PO
2) TEST PROCEDURE
Displays A/D conversion port read value.
0155 or greater: Normal
0154 or smaller: Low battery display
0138 or smaller: No battery display and MSR is done when power on.
To terminate the test, press any key.
Completion print 07
8. TIME DISPLAY TEST
1) KEY OPERATION
8 PO
2) TEST PROCEDURE
6
8 7
Display
Hour
Turn on and off(0.5s)
To terminate the test and print the date and time, press any key.
Print X X X X X X
Year Month Date Hour M inute Second
9. DESTINATION DISPLAY
1) KEY OPERATION
9 PO
2) TEST PROCEDURE
Display the destination code as follows.
U and A version
Display 0
Display X (X:0)
To terminate the test, press any key.
Completion print
5 4 3 2 1
Minute Second
X X X X X X
0 8
V version Japan
1 2
09