Hdd - Konig SEC-DVR309 User Manual

Standalone DVR SEC-DVR309/SEC-DVR316 User Manual

7.7.6 HDD

In Setup display, press ▲▼ to change the highlighted option to HDD, and then
press ENTER to call up HDD Setup display as shown below.
In the surveillance applications, alarm video/audio is much more important than
normal video/audio. So, this digital video/audio recorder is designed to allow the
user to divide each HDD into alarm partition and normal partition. And, alarm
video/audio will be recorded in alarm partition, normal video/audio in normal
partition.
The HDD Setup allows the administrator to format/clear each HDD, set Alarm
Record size and Normal Record size of each HDD, and define the behaviors for
Alarm Record and Normal Record if it reaches the end of the last HDD in the
system.
3
4
5
6
7
8
9
A
▲▼◄►
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to previous display.
If the Save dialog will be shown to ask the user to save the changes, press
ENTER to exit and save, ESC to exit without saving.
Name
1 Alarm Record
2 Normal Record
3 Size (GB)
1
B
C
(Mouse: Left click)
Description
This is the recording under alarm triggered condition.
This is the recording under normal circumstance.
The total HDD storage in GB (Giga-Byte) for Alarm Record and Normal
Record respectively. This item is just for information. Please refer to
Chapter 7.6.6.1 HDD format and Clear for more detailed information and
setup of each individual HDD.
50
2
Please note that if the total alarm