Changes Of User's Data; Date And Time Setting; Tests - INCOTEX 500F Quick Start Manual

10
Press at the end. The VRN is printed and press
'SEt' is displayed. If an error is occurs, the operation must be canceled with
and . A receipt about the event is printed after recording all the necessary data on the FM.
2.2.5. Changing user's data
To start this operation press the key
press . The ESD prints a message about the service intervention and records the event in the fiscal
memory.
The digit '1' is displayed, that corresponds to the first text line of the header message. To enter the field
press . Number 01 (1st character) and its code are displayed, /ex. 01.214 0/.
To clear the previous contents of the text line press
3-digit codes shown in the table above . Press
displayed for a while.
By using keys or
line can be changed as described, as first press
Note: The texts are automatically centered when printed.
Note: If an empty line is left, neither it, nor the following header lines will be printed, except the last
one (containing the TAX OFFICE ADDRESS).
When all the necessary data is entered in the header, press
with a corresponding message additional confirmation is required to be executed by pressing
When confirmed, the new data is recorded in the fiscal memory (if the EFD is fiscalized) and a
message about the event is printed, including the number of header changes left.

2.2.6. Date and time setting

To start first press
Enter the date in format DDMMYY and press
format HHMM and press
. Thee message '5P' is displayed. Enter the service password and press
message about the service intervention and records the event in the fiscal memory. The newly entered
date and time are also printed in the receipt. Press

2.2.7. Tests

To perform tests press
The following tests are available by pressing the corresponding digit key:
0 – Display test
No
0 Visual examination of all segments
1 – Check sum of the EFD firmware.
No
1 The EFD calculates and displays the check sum.
QUICK START GUIDE
. The message 'SP' is displayed. Enter the service password and
different text lines can be reached in ascending or descending order. Each text
. The current date is displayed. Next press
. If the EFD prints a message about additional confirmation, press
in command mode.
Description
Description
for confirmation.
. Up to 32 characters can be entered using their
to confirm the text line. The message 'rdY' is
to enter the field.
. The newly entered data is printed and
. The message dAtE' is displayed.
. The message 't' is displayed. Enter the time in
to end the operation.
Display
8.8.8.8.8.8.8.8.8.8.
INCOTEX 500F
. For confirmation press
. The EFD prints a
Exit
Exit