Summary of Contents for Viola Systems Arctic 3G Gateway 2622
Page 1
This document contains the following sections: • Physical connections and switches • Inserting a SIM card • Setting an IP address using a web browser • 3G/LTE network settings Viola Systems Ltd. Phone: +358 (0)201 226 226 www.violasystems.com support@violasystems.com...
Page 2
2. Physical connections and switches Figure 1. Front Panel 1. Reset button 2. Error LED 3. Ethernet WAN port 4. Ethernet LAN ports (3 port switch) 5. Status LEDs 6. Serial console port (115200 8N1) 7. SIM card slots NOTE: Ethernet LAN ports 0-2 support both crossover and direct Ethernet cabling.
Page 3
Figure 2. Back Panel 1. Serial port 1 2. Serial port 1 configuration DIP switches ( see user manual) 3. Serial port 2 4. Power switch 5. Power connector (15-30 VDC) 6. Antenna connector 3. SIM Card SIM card slots are located on the front panel of the Arctic device (see figure 1). Insert the SIM-card (contacts facing down) into the SIM1 slot when the device is powered off.
Page 4
4. Setting an IP Address Using a Web Browser • Connect the Ethernet cable between the Arctic device LAN port and your computer. • Configure your computer to use the same IP address space as the Arctic device (for example, your computer IP could be 10.10.10.11 with a netmask 255.0.0.0).
5. Wireless Network Settings • Login to the Arctic web user interface using your web browser. • Navigate to Network-->Mobile WAN subpage (see figure 4) Figure 4. Login to the Arctic web user interface • Set Access Point Name (APN) appropriately (usually INTERNET or operatorname.com).