Important Safeguards; Special Instructions; Before Using - T-Fal 1647 Use And Care Instructions Manual

Hide thumbs

Table of Contents

Available languages

When using your iron, basic safety precautions should always be followed, including the

following :

Use iron only for its intended use

To protect against a risk of electric shock, do not immerse the iron in water or other

liquids

When applicable, the iron should always be turned OFF (min.) before plugging or

unplugging from outlet. Never yank cord to disconnect from outlet ; instead, grasp

plug and pull to disconnect.

Do not allow cord to touch hot surfaces. Let irons cool completely before putting

away. Wrap cord around iron when storing.

Always disconnect iron from electrical outlet when filling with water or emptying and

when not in use.

Do not operate iron with a damaged cord or if the iron has been dropped or dama-

ged. To avoid the risk of electric shock, do not disassemble the iron. Return iron to

the manufacturer (see warranty) for examination and repair. Incorrect reassembly

can be very dangerous and armful.

Close supervision is necessary for any appliance being used by or near children.

Do not leave iron unattended while connected or on an ironing board.

Burns can occur from touching hot metal parts, hot water or steam. Use caution

when you turn a steam iron upside down. There may be hot water in the reservoir.

This appliance is only for domestic and personal use.

To avoid a circuit overload, do not operate another high-wattage appliance on the

same circuit.

If an extension cord is absolutely necessary, a 10-ampere cord should be used.

Cords rated for less amperage may overheat. Care should be taken to place the

cord so that it cannot be pulled or tripped over.