Back Panel Connectors - Cisco Explorer 4250 User Manual

Back Panel Connectors

CATV CONVERTER
MADE IN MEXICO
THIS DEVICE IS INTENDED TO
BE ATTACHED TO A RECEIVER
THAT IS NOT USED TO RECEIVE
OVER-THE-AIR BROADCAST
SIGNALS. CONNECTION OF THIS
DEVICE IN ANY OTHER FASHION
MAY CAUSE HARMFUL
INTERFERENCE TO RADIO
CABLE
COMMUNICATIONS AND IS IN
VIOLATIONOF THE FCC RULES,
IN
PART 15.
1
1 Cable In
2 Cable Out
3 Audio Out (L/R)
4 Digital Audio Out
5 Video Out
6 S-Video Out
7 IR Port
8 USB Port
9 AC Outlet
10 AC Power Input
6
DIGITAL
CABLE
AUDIO OUT
OUT
2 3 4 5 6
Connects to the coaxial cable that delivers the signal from your cable service
provider
Connects to a coaxial cable to send analog audio and video signals to a TV or
VCR. These signals are standard-definition TV (SDTV) video and stereo audio
Connects to left/right (L/R) audio inputs of TV or A/V receiver
Connects to an RCA cable to send a digital audio signal to a surround-sound
receiver or other digital audio device
Connects to video input of TV or VCR
Connects an S-Video cable to send an S-Video signal to your TV or VCR. This
signal is standard definition but higher quality than other SDTV connections
Connects to optional VCR Commander™ service
(May not be available on all 4250 models)
Connects to external equipment, such as a keyboard
(May not be available on all 4250 models)
Connects the AC power cord from another device, such as a TV
Connects the 4250 to an AC electrical outlet using the cord provided
L
R IR
VIDEO S - VIDEO USB
OUT OUT
7 8
LISTED 14H1
CABLE EQUIP.
120 VAC 120 VAC
60HZ 400W 60HZ 40W
9 10
T11939