Opening The Pushchair For Assembly - Mamas & Papas P 03 SERIES ADVANCE SWIVEL Instructions For Use Manual

OPENING THE PUSHCHAIR FOR ASSEMBLY

To open the pushchair,
grip the centre of the
handle and push the
locking catch off the stud
on the left side of the
frame.
Grip the middle of the
handle. Place a foot on
the rear axle, to one side
of the brake pedal and lift
the handle upwards
When the frame is almost
fully open, grip the handle
as shown in the diagram.
Push the handle up
sharply until all of the
locks have engaged.
Check that the locks
have fully engaged by
attempting to push the
handle back down.
The frame must not
start to fold.
5