Table of Contents
Advertisement
FITTING THE HOOD
Fitting the hood:
Push the tabs on the ends
of the hood pivots into the
holes in the back of the
armrests.
Fasten the press studs on
the side flaps (1) of the
hood to the studs on the
sides of the backrest.
Fasten the two press
studs on the back of the
hood (2) to the upper or
lower set of studs on the
pushchairs backrest,
depending on the position
in which you have set the
backrest.
Fasten the flaps which are
attached to the inside of
the hood to the velcro
strip located on the inside
face of the backrests side
wings.
Push the tensioning bars
on either side of the hood
downwards.
To remove the hood
simply reverse the
process for fitting it.
IMPORTANT: Always
release the tensioning
bars and fold the hood
back before folding the
pushchair.
9
Hide quick links:
Advertisement
Table of Contents
