Fitting The Hood - Mamas & Papas Pulse Pushchair Instructions For Use Manual

FITTING THE HOOD

Fitting the hood:
Align the clips on the sides
of the hood with the holes
in the pushchair's frame.
Push the clips over the
frames and then slide the
studs on the inside of the
clips into the holes in the
frame.
Pull the back of the hood
down over the back of the
pushchairs backrest.
Push the two tensioning
brackets on the sides of
the hood down until they
lock.
Removing the hood:
Push the tensioning
brackets upwards.
Pull the clips on the sides
of the hood off the handle
frame.
– 8 –