Set Up An Access Point For Wlan Manually - Nokia E66 E series User Manual

After setting up a basic internet access point for packet
data (GPRS), select Options
and define the following advanced settings:
Network type — Select
•
protocol type. The internet protocol defines how
data is transferred to and from your device.
Phone IP address — Enter the IP address of your
•
device. Select Automatic
provide the device IP address. This setting is shown
only if you select Network type
DNS address — Select
•
Secondary DNS address
addresses, if required by your service provider.
Otherwise, the name server addresses are provided
automatically.
Proxy server address
•
proxy server. Proxy servers are intermediate servers
used by some service providers between a browsing
service and its users. These servers may provide
additional security and speed up access to the
service.
Set up an access point for
WLAN manually
1. Select Menu Tools
>
Connection Access
>
2. Select Options New access point
>
new access point, or select an existing access point
Advanced settings,
>
IPv4 or IPv6 as the internet
to have the network
> IPv4.
Primary DNS address and
and enter their IP
— Enter the address of the
Settings
> >
points.
to create a
from the list and then Options
point to use the access point as a basis for the new
one.
3. Define the following settings.
Connection name
•
for the connection.
Data bearer — Select
•
WLAN network name
•
set identifier (SSID), that is, the name that
identifies the specific WLAN, select
manually. To select the network from the
WLANs in range, select
Network status — Select
•
you are connecting to is hidden or
not hidden.
WLAN network mode
•
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a WLAN access point. If you select Ad-hoc,
devices can send and receive data directly with
each other, and no WLAN access point is needed.
WLAN security mode
•
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
additional settings. See the device help for more
information.
WLAN security settings
•
settings for the selected security mode.
Internet
Duplicate access
>
— Enter a descriptive name
Wireless LAN.
— To enter the service
Enter
Search for networks.
Hidden if the network
Public if it is
— If you select
— You must select the
— Edit the security
63