Set Up An Access Point For Wlan Manually; Advanced Access Point Settings For Wlan - Nokia E63 User Manual

Internet
its users. These servers may provide additional security
and speed up access to the service.
Set up an access point for WLAN
manually
1. Select Menu Tools
>
Access points.
2. Select Options New access point
>
access point, or select an existing access point from the
list and then Options
the access point as a basis for the new one.
3. Define the following settings.
Connection name
•
connection.
Data bearer — Select
•
WLAN network name
•
identifier (SSID), that is, the name that identifies the
specific WLAN, select
network from the WLANs in range, select
networks.
Network status
•
are connecting to is hidden or
WLAN network mode
•
Infrastructure, devices can communicate with each
other and with wired LAN devices through a WLAN
access point. If you select Ad-hoc, devices can send and
receive data directly with each other, and no WLAN
access point is needed.
72
Settings Connection
> >
to create a new
Duplicate access point
>
— Enter a descriptive name for the
Wireless LAN.
— To enter the service set
Enter manually. To select the
Search for
— Select Hidden if the network you
Public if it is not hidden.
— If you select
WLAN security mode
•
security mode that is used in the WLAN access point. If
you select WEP (wired equivalent privacy), 802.1x, or
WPA/WPA2 (Wi-Fi protected access), you must also
configure the relevant additional settings.
WLAN security settings
•
for the selected security mode.
Homepage
•
>
want to display as the home page when you use this
access point.
To set up a WLAN access point automatically, use the WLAN
wizard. Select
to use
Advanced access point settings
for WLAN
Select Menu
>
points.
After setting up a basic access point for WLAN, select
Options Advanced
>
advanced settings:
IPv4 settings
•
addresses for the IPv4 internet protocol.
IPv6 settings
•
for the IPv6 internet protocol.
Ad-hoc channel
•
automatically. To enter the channel number (1-11)
manually, select
Proxy server address
•
— You must select the same
— Edit the security settings
— Enter the web address of the page you
Menu Connectivity
>
Tools Settings Connection
> >
settings, and define the following
— Enter the device IP and name server
— Select or enter the name server addresses
— The channel is usually chosen
User defined.
— Enter the proxy server address.
© 2008 Nokia. All rights reserved.
WLAN wiz..
>
Access
>