Dodge 2010 Journey Manual page 445

2. Rotate the applicable bulb and connector assembly
turn counterclockwise and remove the assembly from the
headlamp housing.
1 — Front Turn Signal/Park Lamp Bulb
2 — Side Marker Lamp Bulb
3 — Low Beam Headlamp Bulb
4 — High Beam Headlamp Bulb
1 ⁄ 3. Disconnect the bulb from the harness connector and
4
then connect the replacement bulb.
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
4. Install the bulb and connector assembly into the
headlamp housing and rotate it
it in place.
MAINTAINING YOUR VEHICLE 445
CAUTION!
⁄ turn clockwise to lock
1
4
7