Related Manuals for SANLI LBP350
Summary of Contents for SANLI LBP350
- Page 1 SANLI LawnBeetle AUSTRALIA DEVELOPMENT PTY LTD Please read this instruction manual carefully before operating your new Sanli lawnmower. Model number: LBP350...
-
Page 2: What You Get With Your Sanli Mower
Australian Consumer Law. You will be provided with a refund, repair or exchange by Sanli for this product if it becomes defective within the warranty period. Sanli will bear the reasonable expense of claiming the warranty. -
Page 3: Table Of Contents
Starting the engine ....................10 Basic maintenance made easy.................. 11 Technical specifications .................... 13 Mower features......................14 Fast trouble shooting ....................15 Contact Sanli Australia ....................16 What you get with your Sanli mower. • Petrol engine lawnmower • 6 00ml container of SAE30 engine oil • Rear grass catcher • 2 x lower handles • Basic tool kit... -
Page 4: Tips On Mower Safety
Mow across the face of slopes, not up & down, and avoid mowing on very steep slopes. We recommend you avoid mowing when it is raining, or after nightfall. Do not operate the machine by pulling it towards you as you risk pulling it on to your feet. Instead, always push and walk behind your mower. Sanli LawnBeetle User Guide... - Page 5 And never use or store the mower near a naked flame. 19. S anli recommends that you wear a safety helmet, ear protectors, safety goggles and safety boots when using a mower. 20. A ll servicing and repair work under warranty must be carried out by an Authorised Sanli Dealer, otherwise the 24 month warranty may be void. Sanli LawnBeetle User Guide...
-
Page 6: Assembling The Handle
The grass catcher attaches easily by lifting the mower’s rear flap and inserting it. Just lift the rear flap with one hand and then locate the catcher onto the lugs provided at the rear of the deck. Sanli LawnBeetle User Guide... -
Page 7: Adjusting The Cutting Height
Adjusting the Cutting Height. WARNING! Turn mower off before adjusting cutting height lever. The lawnmower has three cutting heights. It is supplied with the height set in the middle position. Sanli strongly recommends that you leave the cutting height at the factory level as it encourages a healthier lawn. Each of the wheels have three mounting holes as shown in figure 1. -
Page 8: Before You Begin
SAE30 engine oil. To check the oil level, just unscrew the yellow dipstick, wipe with a clean rag and replace into the oil filler, but do not screw it back in place, and remove again. The oil level must be on or just below the MAX mark on the dip stick. Sanli LawnBeetle User Guide... - Page 9 3. Oil changing. Sanli recommends that the first oil change is carried out after the first 5 hours of mower use. Thereafter, change the oil after every 25 hours of use or at least once a year. Also check your oil level before mowing every time to ensure that the engine is being fully protected.
-
Page 10: Starting The Engine
Firmly hold the top handle with one hand, and then with your other hand pull the cord slowly until you feel resistance. Then pull vigorously. 5. W hen the engine has been running for at least 3 seconds (more time on cold days) adjust the throttle control lever to the ‘Fast’ position. 6. T o turn off your mower, slide the throttle control lever down to the ‘Stop’ position. After it has stopped, slide the ‘Red’ petrol tap lever to the right ‘Off’ position. 10 Sanli LawnBeetle User Guide... -
Page 11: Basic Maintenance Made Easy
Either carefully brush off any excess dirt particles, or replace the air filter with a new one. To protect your warranty, only use a genuine Sanli air filter. We recommend that you replace the air filter after every 12 months of regular usage. When the air filter has been cleaned or replaced, screw-in the cover, taking care not to over-tighten. -
Page 12: Cutting Blade
Oil changing. Sanli recommends that the first oil change is carried out after the first 5 hours of mower use. Thereafter, change the oil after every 25 hours of use or at least once a year. Also check your oil level before mowing every time to ensure that the engine is being fully protected. -
Page 13: Technical Specifications
Technical specifications. Model number LBP350 Petrol engine 3.5 hp (2.6 kW) OHV 4 Stroke Engine speed 2,800 rpm Engine power 2.35 kW @ 3,000 rpm Spark plug NGK BPR 6ES Engine oil SAE30 – 600ml Chassis Polypropylene Cutting width 39.5 cm Adjustable cutting heights Grass collection capacity 40 litres Noise level 73.6 dB(A) Weight (including catcher) 26kg Sanli LawnBeetle User Guide... -
Page 14: Mower Features
Mower features. Throttle control lever Spark plug cap Grass catcher Oil filler Grass discharge flap Petrol cap Warning label Handle toggles Petrol tap Handle assembly 14 Sanli LawnBeetle User Guide... -
Page 15: Fast Trouble Shooting
Refer below to the list of potential problems you may encounter, along with suggested remedies. For servicing and all warranty work, contact your local Authorised Sanli Dealer. Problem Likely cause... -
Page 16: Contact Sanli Australia
SANLI AUSTRALIA DEVELOPMENT PTY LTD Call the Sanli Customer Service Desk on 1800 466 068 Email: support@sanli.com.au Web: www.sanli.com.au Head Office: 9 Gatwood Close, Padstow, NSW 2211...