INSTRUCTION MANUAL LMS400 LAWN MOWER What you get with your mower ×1 ×1 ×2 ×1 ×1 ×4 ×1 ×1 ×1 1. Petrol Lawnmower 4. Rear Grass Catcher 7. Spark Plug Socket 21mm 2. Instruction Manual 5. Spanners 8. Cable Clip 3.
Page 3
1. Comfort Grip Handle 5. Air Filter 9. Height Adjustment Lever 2. Throttle Control Lever 6. Spark Plug 10. Grass Catcher 3. Rear Flap 7. Muffler/Exhaust 4. Fuel Tank 8. Oil Sump PAGE 3 WWW.SANLI.COM.AU...
Page 4
INSTRUCTION MANUAL Parts required: 4 x bolts and nuts Remove and ensure you have all the parts required for assembly (see page 2 for reference) 1. LOWER HANDLE BAR ASSEMBLY 1. Lower Handle Bar Assembly Fit the lower handles with bolts and nuts supplied.
ASSEMBLY GUIDELINES LAWN MOWER LMS400 2. UPPER HANDLE ASSEMBLY Parts required: 2 x Handle Toggles 2 x Bolts 2. Upper Handle Assembly 4. Attach the Grass Catcher 6. Complete machine ready for your Fit the right side Handle Toggles and Lift the Rear Flap with one hand.
INSTRUCTION MANUAL BEFORE YOU BEGIN WARNING! The following procedures must be carried out before you start the engine of your lawnmower. FILL OIL SUMP WITH 600ml of FILL FUEL TANK WITH SAE 30 Oil PREMIUM PETROL (NO E10 PETROL) Fig 1 Fig 2 Fig 4 Fill Fuel tank with min 95 octane...
BEFORE YOU BEGIN/STARTING THE ENGINE LAWN MOWER LMS400 STARTING THE ENGINE WARNING! The following procedures must be carried out before you start the engine of your lawnmower. Fig 5 Fig 6 Fig 7 Fig 8 Starting the engine 4. Firmly hold the top handle with 6.
INSTRUCTION MANUAL USING YOUR MOWER Fig 9 Fig10 Fig11 Fig12 Fig13 Cleaning your Mower Attach the Grass Catcher tarpaulin or similar cover as it may The grass catcher attaches easily by cause condensation resulting in WARNING! Turn mower off before cleaning lifting the mower’s Rear Flap with corrosion.
USING YOUR MOWER/SAFETY TIPS LAWN MOWER LMS400 TIPS ON MOWER SAFETY HOT! Max 20° 1. Before starting your mower inspect 8. Mow across the face of slopes, not 14. Do not transport the it carefully to ensure that there are up &...
first five hours of mower use. possible. Use only genuine SANLI to prevent possible injury when Thereafter, maintenance of the spark parts or those approved by SANLI. handling the blade. Disconnect plug should take place every 25 hours. the spark plug cap and tilt the Excessive vibration when mowing Remove the spark plug cap (Fig.14)
BASIC MAINTENANCE LAWN MOWER LMS400 Fig16 Fig17 Fig18 for this). Insert the filter cartridge Changing the oil Do not twist the foam cartridge to clean it as this could cause damage. into its housing and replace The first oil change should be If your mower is not serviced the filter lid, ensuring that each carried out after the first 5 hours...
INSTRUCTION MANUAL TECHNICAL SPECIFICATION Consistent with our policy of continuous improvement, SANLI reserves the right to change the design and configuration of any of its products without notice or obligation. Therefore, please treat the text and images in this manual as being for illustrative purposes only.
The warranty does not affect your statutory rights or remedies as outlined in applicable consumer legislation. Sanli company provides an express warranty for this product for a period of 3 years from your original purchase date with the exception of commercial-use which is for a period of 90 days.