Page 1
Start Here LTE Internet (Installed) uick_Start_LTE.indd 1 7/30/14 10:42 AM...
Page 3
• You’ve purchased a great, new broadband service. • Equipment has been professionally installed and activated. • The installer showed you how to access My Verizon to manage your account. • You know how to check your data usage and customize your alerts online.
Status LEDs Button Description Power Indicates the power status of the router. Internet Indicates the connectivity to the Verizon 4G LTE Network. Phone 1/Phone 2 Phone service is not supported at this time. Ethernet Indicates devices are connected via Ethernet. Wi-Fi Indicates whether or not Wi-Fi is enabled.
Back panel Item Name Description USB Port The USB port was designed for diagnostic purposes only; it is not intended for customer use. Therefore, never place a USB-based device into the USB port of the router under any circumstances. Doing so may damage the device and will negate its warranty.
Page 6
Customizing your router’s settings Follow these steps to customize the router’s settings (including changing the Broadcast SSID and WEP/WPA2 password) - For Advanced Users: Open your web browser and enter 192.168.1.254, (the router’s default IP address), in the URL bar and press Enter. Type admin in the User Name box and type the Login Password printed on the back label of your router in the Password box.
Once you are registered and signed in to My Verizon, you can manage your data usage alerts. • Receive alerts when data used reaches 50%, 75%, 90 % and 100% of your monthly data allowance as well as 90% of each 1GB overage.
Page 8
Creating an Email Account First time customers register by logging into My Verizon. Once logged in, select your LTE Internet (Installed) line of service. On the My Verizon tab on top, select My Plans and Services. In the My Data Plan section, select the link for Manage Email.
Troubleshooting If you’re having trouble accessing the Internet, try these steps: Check all connections on the back of the router. Power cycle the antenna by unplugging the power inserter and plugging it back in. • Keep unplugged for 1 minute. •...
Page 10
Router Self-Install Follow these Self-Installation Instructions if for any reason you need to replace your router: Router Unplug your router. Disconnect the coaxial cable from the WAN port of your old router and plug it into your replacement device. Plug in your new router (Keeping the On/Off switch on the back in the Off position).
Terms of Service To read the full Terms of Service for Verizon Wireless LTE Internet and get other useful information about the product, visit verizonwireless.com/lteinternetinstalled. uick_Start_LTE.indd 11 7/30/14 10:43 AM...