Matrox Monarch HD User Manual page 31

Monarch HD must be set to DHCP IP mode (default). If you need to switch
3
the device from Static IP mode to DHCP IP mode, you can either reset the
device to factory defaults (see
it to DHCP using the Command Center (see
page 38).
On a computer that is on the same network subnet as your Monarch HD
4
device, download the Matrox Monarch Finder utility at
www.matrox.com/video/support/. The Matrox Monarch Finder is available
for both Mac OS and Windows systems.
Double-click the downloaded MatroxMonarchFinder file to open the finder
5
utility.
In the Matrox Monarch Finder window, click Scan . The finder will detect
6
all the Monarch HD devices that are connected to the same network subnet
as your computer, and display each device's name and IP address. Take note
of the IP address(es).
¥ Tip If you have multiple Monarch HD devices, you may want to change
the name of each device for easier identification (see
password" on page 22).
Open the Command Center (see
7
page 18).
Connecting to a network without a DHCP server (Static IP
mode)
When connecting to a network without a DHCP server, the network does not
assign an IP address to your Monarch HD device. In this case, you must assign a
static IP address to Monarch HD and you may be required to change your
computer's network configuration to establish a connection between your
computer and Monarch HD.
Power Monarch HD (see
1
2 Monarch HD must be set to Static IP mode. By default, Monarch HD is set
to DHCP IP mode. You can switch Monarch HD to Static IP mode using the
Reset button (see
Establish a connection between Monarch HD and your computer using one
3
of the following methods:
Connect an Ethernet cable from Monarch HD's LAN port directly to your
$
computer's Ethernet port.
Connect an Ethernet cable from Monarch HD's LAN port to the same
$
network switch as your computer.
In order for your computer to communicate with Monarch HD, your
4
computer's IP address must be in the same network range as your Monarch
HD's IP address. If it isn't, then you must change your computer's IP address
"Reset to factory defaults"
"Accessing the Command Center"
"Powering Monarch HD"
"Switch to Static IP mode"
Network connection and IP address
on page 11), or set
"Setting the IP mode"
"Device name and
on page 9).
on page 11).
17
on
on