Dismantle And Install The Middle And Lower Hinge - Haier AFD631GW Service Manual

SERVICE MANUAL
Model:AFD631GW/GB/GR
strip at the other side of the cabinet.
Note: for the models with cabinet display, the above operation concerning cables is not needed.
3-2-3: Dismantle and install the middle and lower hinges
Before change
PART-3
Hole plug
Screws affixed to the lower hinge
(1) Detach the 3 screws affixed to the middle hinge and remove the hinge. Unscrew the hinge axis
and then screw it from the reversed direction.
(2) Remove the upper and lower doors separately. Dismantle the stop blocks on the bottom of the
doors. Turn them by 180 degrees and refit them on the other side.
(3) Tilt the refrigerator to the required angle. Detach the screws fixing the lower hinge and remove the
hinge.
(4) Fix the lower hinge to the bottom of the other side of the cabinet. Then, mount the lower door on
the lower hinge.
(5) Take out the 3 hole plugs on the other side of the cabinet.
Turn the middle hinge by 180 degrees and install it on the other side of the cabinet. Attach the 3
screws removed in step 1. Mount the 3 hole plugs into the holes where the hinge is seated
originally.
Note: For 3-door refrigerators, the operation concerning the lower hinge is not needed.
Middle hinge
Screws
Middle hinge axis
lower hinge
13
Issue 201003
Rev. Ref11003S006V0
After change
13