Remove Lower Door - Haier HRF520BW User Manual

Installation
13.
a
b
d
14.
15.
17. 18.
19.
36
13. Change the positions of the blanking plugs and
a Remove lower door.
b Change the door stop at the bottom of the lower
door from the current position to opposite side.
c Unscrew the bottom hinge.
c
d Take out the new bottom hinge from the acces-
e e Lift the lower door carefully onto the bottom hinge
14. Take out the new hinge from the accessory bag
and screw the new middle hinge of upper door to
the other side of the door opening.
Be sure the pivot fits into the hinge barrel of lower
door.
16.
15. Lift the door carefully on to the lower hinge so
16. Fix the upper hinge with the screws.
17. Put the connection cable through the hinge
18. Plug in the connection cable and fit it into the
19. Replace faceplate and cover, fix it with the screws
After changing the door check that the door seals
are located properly on the housing and all screws are
tightened well.
the screw on the other side.
sory bag and screw the new bottom hinge to the
other side of the door opening.
so that the pivot fits into the hinge barrel.
that the pivot fits into the hinge barrel.
cover (delivered in the accessory bag) and put it
over the hinge.
opening.
and reinsert the fixation (see fig. 3).