Protect Private Messages; Delete Private Messages; Memory Full Indication - scope GEO 40A7 User Manual

The message is only deemed to be read if the entire message,
including the pre-time stamp, is read through to the end.
2.2 Protect Private Message
Whilst reading a private message, press Selection
key to enter the following screen:
Press " " or " " to choose LOCK, then press
Read key to confirm locking:
To unlock a protected message, press Selection
key to display:
Press " " or " " to choose YES, then press
Read key to confirm unlocking.

2.3 Delete Private Messages

While reading a private message, press "
" " " or Read key to select the desired
message, then press Selection key twice to
enter the following screen:
Press " " or " " to choose YES, then press
Read key to confirm.

2.4 Memory Full Indication

The pager can store up to 60 private messages.
When the message memory is full, "Memory
Full" will be displayed. When a new message is
received under memory full, the oldest unprotected
message is automatically deleted and the newly
received message is stored.
Note: "Memory Full" display may have been disabled on your pager. If in doubt,
check with your dealer.
" or