Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for scope GEO40A
Summary of Contents for scope GEO40A
- Page 1 GEO40A ALPHANUMERIC PAGER USER MANUAL...
- Page 2 SCOPE GEO40A User Manual 1. Introduction The GEO 40A is a multi-function alphanumeric POCSAG pager with high memory capacity & large LCD display. It provides 4 keys for clear & simple operation and can be used as a personal (on-site) pager, or alternatively, as a wide area information pager that can receive data such as news, weather reports, etc…...
- Page 3 SCOPE GEO40A User Manual Max. 40 characters Power Up message Unread reminder DD/MM or MM/DD date display format selectable Normal or word wrap display mode Pre or Post time stamp facility 30 – 180 seconds no alert period for repeated message ‘IN RANGE’...
- Page 4 SCOPE GEO40A User Manual 2.5 Mechanical Specification • Unit size (mm): 77mm(L)×53mm(W)×20.5mm(H) • Display area (mm) : 63.9mm(L)×27.4mm(W) • No. of Keys: • Door: Main battery door • Environmental concern: Drop test – GEO Spec., QFD-07 Thermal test – GEO Spec., QFD-09 Vibration test –...
- Page 5 SCOPE GEO40A User Manual 2.7 LCD display description (1) LCD display screen (2) Power off display (3) Power on standby display (4) Time display mode (5) Alarm display mode (6) The content of call header GEO40USER 4 of 10 Issue 1...
- Page 6 SCOPE GEO40A User Manual When the message is received, the first line of each message is the call header 3. Operation Illustration (1) Turn on the pager When the pager is in “OFF” state, press “Read/Confirm” key for several seconds and the pager will turn on with sound/vibration for 16 seconds.
- Page 7 SCOPE GEO40A User Manual III) AUTO on/off Use ‘Left’ or ‘Right’ key to change setting, use “Read/Confirm” key to confirm the current setting & jump to the next field. The sequence is ON time & then OFF time. IV) MELODY Use ‘Left’...
- Page 8 SCOPE GEO40A User Manual The buzzer icon is turned on If MOTOR is selected, there will be a short vibration and the screen will change as below: The Vibrate icon is turned on. If MUTE is selected , then the following screen will be shown: Buzzer (Beeper) and vibrate icon will not be displayed.
- Page 9 SCOPE GEO40A User Manual (4) Messages Reading I) Reading message At the standby mode and the clock display mode, press “ Read/Confirm” key. There will be an indication as follows: If there are messages stored, the menu will be shown as follows: Pressing the “Left”...
- Page 10 SCOPE GEO40A User Manual If DELETE is chosen, the pager will display the following menu: the message will be deleted and the pager will return to the message reading mode. If the message is already locked, the above menu will be shown. Select “Yes” and press “Read/Confirm”...
- Page 11 SCOPE GEO40A User Manual II) Do NOT subject this equipment to: Mechanical shock Excessive humidity or moisture Extremes of temperature Corrosive liquids This equipment is designed for indoor use, unless expressly stated otherwise, and must not be used in classified Hazardous Areas, including areas containing explosive or flammable vapours, unless express authorization has been given in writing by the manufacturer.