Contents I. Pager Layout........1 II. Features…………......2 III. Guide to Operation......5 1. Power On/Off..........5 1.1 Power On..........5 1.2 Power Off ..........5 2. Private Messages........6 2.1 Read Private Messages ......6 2.2 Protect Private Messages ......8 2.3 Delete Private Messages ......9 2.4 Memory Full Indication....
A. Battery Door B. Battery Lock C. Chain Slot D. Sounder E. LCD display screen F. Read Key G. Right Key H. Left Key I. Selection Key II. Features 1. Max.6 cap codes which can set as Private or Public and individually enabled or disabled.
Page 3
11. Private messages can be locked, unlocked and deleted, either individually or all. 12. Repeated message indication " " and indication for message error (blinking erroneous characters) 13. Message time stamping. 14. Receiving alert function settable for each entry of Public message.
III. Guide to Operation 1. Power On/Off 1.1 Power On Press Read key for 2 seconds, the Power Up Message appears, with the sound or vibration alert generated for 16 seconds, or until a key is pressed. 1.2 Power Off 1.2.1 Press Selection key until the Setup menu appears: 1.2.2 Press "...
The message is only deemed to be read if the entire message, including the pre-time stamp, is read through to the end. 2.2 Protect Private Message Whilst reading a private message, press Selection key to enter the following screen: Press " "...
3. Public Messages Public message folders will only be visible if your dealer has enabled them. They are not used for Private (On-Site messaging) purposes. 3.1Read Public Messages Press Selection key until the public message menu appears. (Folder names and number of folders may be different among operators.) Press Selection key or "...
will be: Press " " or " " to change hour, minute, time format, date and day. Press Read key to set the next item until the last one (i.e. day), then press Read key to finish setting. The pager will detect automatically, with very short sounds or vibrations to indicate errors to the user if there is a mistake when setting the date, e.g.
If 24-hour format is selected by the user in the “TIME” menu, the auto on/off setting screen will be: press " " or " " and Read key to set Automatic On/Off ( i.e. "ENABLE" or "DISABLE"), and Power On/Off time. The time on the left is the power on time.
Press " " or " " to select CONTRAST, then press Read key to enter "SET CONTRAST": Press " " or " " to adjust LCD contrast, then press Read key to confirm. 4.6 Alert Mode Setting Press Selection key to enter Setup menu: Press "...
represents alert off. Press Selection key to exit when finished. The folder position on this screen follows the folder position in Public Message Menu. Positions 1-4 means the first 4 folders on the first page of the menu, positions 5-8 means the 4 folders on the second page of the menu.
Page 11
(i) this device may not cause harmful interference, and (ii) this device must accept any interference received including interference that may cause undesired operation. CE Declaration of Conformity for Alphanumeric Pager GEO 40A7 The Manufacturer hereby declares that the equipment identified above and to which this Declaration relates conforms with the protection requirements of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility.