Introduction; Front View - ProScan PLCD3271A-D Instruction Manual

Introduction

1 Front View

Remote Control window (Keep clear)
Power Indicator
1).(Power on/Standby)LED Indicator: Press POWER button to turn on or off.
(IR) Infrared Receiver: Receives Infrared signals from the remote control.
Indicator off(Red)
Indicator on(Blue)
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 30
window.
2). The functions of the buttons:
INPUT: Press to display the input source menu.
MENU: Press to display the OSD menu,
press again to exit the menu.
/
: Press to scan through channels.
VOL+/-: Press to adjust the sound volume.
POWER: Turn on/standby the TV set.
Introduction
Standby mode
Power on mode
0
to the left or right side and 20
Press INPUT button on the TV set or SOURCE button on
the remote control to display the input source menu, and
use
remote control to select the input source, press OK button
on the remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
0
above or below the remote control
/
button on the TV set or
5
button on