Static Ip - Samsung C23A750X User Manual

2
Using "Central Station"

2.5.2 Static IP

To configure the IP address (private or official) on your PC, someone (mostly a server system) must
distribute and allot an IP address to the PC. An official IP address is allotted by your Internet service
provider, and a private IP address is allotted by your Internet router. You can select whether to configure
the IP address on the PC automatically or manually. The static IP address mode is used to manually enter
an IP address. The static IP address mode is suitable if the IP address for the PC should not be changed
(such as for a file sharing server) and generally is not used, except under such special circumstances.
When using your Central Station monitor's or notebook PC's LAN network, ensure you insert a LAN
cable into only one device. Otherwise, a system crash may occur.
Static IP User
1
Set the LAN network for the notebook PC to Disable.
2
Go to Control Panel
adapter settings. Next, right-click on the notebook PC's network device and select Disable.
3
Right-click on the Central Station monitor's network device (marked "LAN9512/LAN9514 USB 2.0
to Ethernet 10/100 Adapter #7"), and select Use.
4
Configure the static IP.
Assign the static IP that is allotted to the Central Station monitor's network device.
Downloaded from ManualMonitor.com Manuals
Select Properties Internet Protocol Version 4 (TCP/IPv4)
Network and Internet
Be sure to perform this process before configuring the IP.
Go to Control Panel Network and Internet
adapter settings. Next, right-click on the Central Station monitor's network device (marked
Properties.
Network and Sharing Center
Network and Sharing Center
2 Using "Central Station"
Change
Change
37