Remote Audio Controls; Electronic Vehicle Information Center (Evic) - Jeep 2010 Liberty User Manual

ELECTRONICS
Guide Me Home
• Press the NAV hard-key to access the Navigation Main Menu.
• Touch the GUIDE ME HOME soft-key to route you back to your home destination from
your current location. Touch the GO soft-key to start your trip.
Map
• Press the NAV hard-key to access the Navigation Main Menu.
• Touch the MAP soft-key to display a map of your current position.

REMOTE AUDIO CONTROLS

• Press the button in the center to select the next preset station (radio) or to change CDs if
equipped with a CD Changer.

ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)

• Press the STEP
Economy, DTE, Elapsed Time, and Units).
button to scroll through sub menus (i.e., Trip Functions, Avg. Fuel
• The remote audio controls are located on the
rear surface of the steering wheel.
Right Switch
• Press the switch up or down to increase or
decrease the volume.
• Press the button in the center to change
modes AM/FM/CD/SAT.
Left Switch
• Press the switch up or down to search for the
next listenable station or select the next or
previous CD track.
• The EVIC features a driver interactive display
that is located in the instrument cluster.
Pressing the controls on the steering wheel
allows the driver to select vehicle information
and Personal Settings. For additional
information, refer to Programmable Features
in this guide.
• Press and release the MENU
the mode displayed will change between
Compass/Temperature, Trip, System Status,
and Personal settings.
32
button and