Scanning The Next Originals During Copying (Auto Job Start) - Toshiba e-Studio 281c Operator's Manual For Basic Function

2.Making Copies (Cont.)

Scanning the next originals during copying (Auto job start)

You can reserve a copy job by scanning the original during continuous copying or while "READY (WARM-
ING UP)" appears.
1
Place the original(s).
2
2
Select the copy mode and set the number of copies.
Note that the job starts in the copy modes of the previous job unless you set new ones particularly for this job.
3
Press the [START] button on the control
panel.
• Up to 10 jobs can be stored in the memory. When an 11th job is
placed on the original glass or the Reversing Automatic Docu-
ment Feeder (optional) and the [START] button is pressed, "Auto
Start" appears on the touch panel.
• A maximum of 1000 LT sheets, or up until the memory becomes
full can be accepted per 1 copy job. (
of sheets for scanning")
72
2.HOW TO MAKE COPIES
P.61 "Maximum number