Selecting Finishing Modes; Type Of Finishing Mode - Toshiba e-Studio 281c Operator's Manual For Basic Function

4. Selecting Finishing Modes

Type of finishing mode

The available finishing modes differ depending on the type of finishing device installed (MJ-1024, MJ-
1023, MJ-1022, MJ-1101, MJ-6004 or MJ-6101). Check the available finishing modes with the table below.
Finishing device
3
MJ-1024 + MJ-6004
MJ-1024
MJ-1023 + MJ-6004
MJ-1023
MJ-1022
MJ-1101 + MJ-6101
MJ-1101
No finishing device
MJ-1024: Saddle Stitch Finisher
MJ-1023: Multi Position Staple Finisher
MJ-1022: Hanging Finisher (for e-STUDIO281c/351c only)
MJ-1101: Finisher
MJ-6004: The Hole Punch Unit for MJ-1024 and MJ-1023
MJ-6101: Hole Punch Unit for MJ-1101
100
3.SETTING OF BASIC COPY MODES
Sort/ Rotate Staple
Group sort
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes

Type of finishing mode

Maga-
Maga- zine sort
sort zine sort & Saddle
stitch
Yes Yes Yes
Yes Yes Yes
Yes Yes No
Yes Yes No
Yes Yes No
Yes Yes No
Yes Yes No
No Yes No
Yes: Available
No: Not available
Saddle Hole
stitch punch
Yes Yes
Yes No
No Yes
No No
No No
No Yes
No No
No No