Scanning The Next Originals During Copying (Auto Job Start) - Toshiba e-Studio 2500c Operator's Manual
Multifunctional digital color systems
Hide thumbs
Also See for e-Studio 2500c:
- Operator's manual (418 pages) ,
- Manual (346 pages) ,
- Scanning manual (146 pages)
Table of Contents
Advertisement
2 HOW TO MAKE COPIES
Scanning the next originals during copying (Auto job start)
You can reserve a copy job by scanning the original during continuous copying or while "READY
(WARMING UP)" appears.
1
Place the original(s).
2
Select the copy mode and set the number of copies.
Note that the job starts in the copy modes of the previous job unless you set new ones
particularly for this job.
3
Press the [START] button on
the control panel.
Up to 10 jobs can be stored in the memory. When an 11th job is placed on the original
glass or the Reversing Automatic Document Feeder (optional) and the [START] but-
ton is pressed, "Auto Start" appears on the touch panel.
A maximum of 1000 LT sheets, or up until the memory becomes full can be accepted
per 1 copy job. (
80
Making Copies
P.67 "Maximum number of sheets for scanning")
Advertisement
Table of Contents
