Adjustment Of The Angle Of The Control Panel - Toshiba e-Studio 281c Operator's Manual For Basic Function

1.Description of Each Component (Cont.)

Adjustment of the angle of the control panel

When adjusting the angle of the control panel
1
The angle of the control panel is adjustable at any angle between 7 and 45 degrees from the horizontal
position.
When changing the angle of the control panel, be careful not to catch your hands in the gap between the
equipment and the control panel. This could injure you.
When fixing the angle of the control panel
The angle of the control panel can be fixed by using the stopper on the backside of the control panel (at 7
degrees from the horizontal position). The stopper is located on A when the equipment is set up. Move it
from the position A to B before fixing it.
A: The position where the angle is adjustable.
B: The position where the angle is fixed.
1
Slide the stopper (in the position A)
slightly to the right, and then pull it out.
30
1.BEFORE USING EQUIPMENT
B
A