Desa VVSR18 Owner's Operation And Installation Manual page 10

INSTALLATION
Continued
Installation and Gas Connection
1. Place the burner pan assembly in the center
of the fireplace floor. Make sure the front of
pan faces forward.
2. Thread the gas supply fitting to the fireplace
gas supply pipe. Use thread sealant.
3. Install adapter fitting onto the burner inlet
fitting using thread sealant on male threads
of burner inlet fitting (see Figure 7). Adjust
to most convenient position.
4. Install the gas connector tube to the gas sup-
ply fitting. Carefully shape tube to attach to
adapter fitting. Be careful not to cause kinks
in tube.
Burner Pan
Assembly
(Facing Front
of Fireplace)
Figure 7 - Connecting Gas to Appliance
10
Gas
Connector
Tube
Adapter
Fitting
www.desatech.com 901265-01P