Miele G 8050 Operating Instructions Manual page 60

Installation
^ Screw the countersunk screws
(3.9 x 22) supplied upwards through
the securing pieces on the left and
right hand sides into the work surface
to secure the dishwasher.
Ensure that the seal on the top edge
of the dishwasher fits directly
against the worktop.
If this is not the case, adjust the feet
a bit more.
Do not use silicone sealant to seal
the gaps between the machine and
any neighbouring units, as this
would hinder ventilation to the
circulation pump.
60
Granite and marble worktops:
With these worktops the dishwasher
must be securely screwed to
neighbouring units on the right and left
hand sides. For this you will require two
special fixing brackets (available as a
special accessory at extra cost).