Miele G 8050 Operating Instructions Manual page 47

Problem
The "Water inlet"
indicator light is flashing
and the programme does
not continue.
Possible cause
The stopcock is closed.
The water inlet filter is
blocked.
The water pressure at the
intake is lower than
0.3 bar.
Problem solving guide
Remedy
Before rectifying the
problem you must:
– Press the "Start/Stop"
button for at least one
second.
– Start the programme
again.
Open the stopcock fully.
Before rectifying the
problem you must:
– Press the "Start/Stop"
button for at least one
second.
– Switch the dishwasher
off using the "On/Off"
button.
Then:
– Clean the water inlet
filter, see "Cleaning the
water inlet filter".
Seek professional advice.
47