Drying - Miele G 8050 Operating Instructions Manual

Operation
How the Delay start time is shown in
the display:
up to 59 minutes:
e.g. 30 minutes = 30
between 1 hour and 9 hours 30
minutes:
e.g. 5 hours = 5.00
10 hours and over:
e.g. 15 hours = 15^
,
To prevent children coming into
contact with dishwasher detergent
do not fill the detergent dispenser
until just before starting the
programme, i.e. before pressing the
"Start" button and activate the child
safety lock.
When using the "Delay Start"
function, make sure that the
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary.
Starting a programme before the
Delay start period has elapsed:
A programme can be started before the
Delay start period has elapsed.
Proceed as follows:
^ Press the h/f button for at least one
second.
The d indicator light will go out.
34
Note:
If the "Drying" additional function had
been selected, then you will need to
select it again.
^ Press the Start/Stop button h/f.
The programme will begin. The h/f
and l indicator lights will come on.

Drying

The "Drying" additional function can be
selected immediately after selecting the
programme. N.B. It cannot be selected
with the I COLD programme. The
drying process is carried out by the
built-in turbothermic fan and depending
on the programme, additional heating
which switches on for 11 - 17 minutes.
The total programme duration will
increase accordingly.
^ First select the programme you
require.
^ Then press the +c button to select
the "Drying" additional function.
^ Press the Start/Stop button h/f to
start the programme and the "Drying"
additional function.