Power Liftgate - If Equipped - Jeep 2009 Commander Owner's Manual

36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Power Liftgate — If Equipped
The power liftgate may be opened manually or
by pressing the LIFTGATE button on the Re-
mote Keyless Entry (RKE) transmitter. Press
the LIFTGATE button on the RKE transmitetr
twice within five seconds, to open the power liftgate.
Once the liftgate is open, pressing the button twice within
five seconds a second time will close the liftgate.
Also, the power liftgate may be closed by pressing the
Liftgate switch located on the left rear trim, near the
liftgate opening. Pressing once will close the liftgate only.
This button cannot be used to open the liftgate.
Rear Liftgate Switch
When the LIFTGATE button on the RKE transmitter is
pressed two times, the turn signals will flash twice to
signal that the liftgate is opening or closing.