Display Functions - Fiat Bravo Owner's Handbook Manual

DISPLAY FUNCTIONS

(see Multifunctional Display or Reconfigurable Multifunctional Display)
Dimmer (Passenger compartment
control light rheostat)
(only with side/taillights on)
With this function it is possible to adjust
brightness of the instrument panel and of
buttons and controls of sound system and
automatic climate control system (where
provided) according to 8 levels (for ver-
sions/markets, where provided).
To adjust brightness proceed as follows:
– briefly press button MODE, the previ-
ously set level will flash on the display;
▲ ▼
– press button or to adjust the
brightness level;
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
Speed Beep (Speed limit)
With this function it is possible to set the
car speed limit (km/h or mph); when this
limit is exceeded the driver is immediate-
ly alerted (see section "Warning lights and
messages").
To set the speed limit, proceed as follows:
– briefly press button MODE, the display
will show wording (Speed Beep);
▲ ▼
– press button or to select activa-
tion (On) or deactivation (Off) of the
speed limit;
– if selecting (On), press button
to select the required speed limit and then
press MODE to confirm.
Note The possible setting is between 30
and 200 km/h, or between 20 and 125
mph depending on the unit set previous-
ly (see "Distance unit (Dist. Unit)" para-
graph described later. Every press on but-
▲ ▼
ton / increases/decreases by 5 units.
▲ ▼
Keeping the button / pressed obtains
the automatic fast increase or decrease.
When you are near the required setting
complete adjustment by single presses.
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
To cancel the setting, proceed as follows:
– briefly press button MODE: (On) will
flash on the display;
▼
– press button
display;
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
▲ ▼
or
: (Off) will flash on the
29