Fiat Bravo Owner's Handbook Manual page 162

B
fig. 2
Please note:
❒ the jack weight is 1,76 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired: if it breaks
it must be replaced with a new genuine
jack;
❒ no tool other than its cranking device
may be fitted on the jack.
A
F0Q0732m
fig. 3
To change a wheel proceed as follows:
❒ Stop the car is a position that is not
dangerous for oncoming traffic where
you can change the wheel safely. The
ground should be flat and adequately
firm;
❒ turn the engine off and pull up the hand-
brake; engage first gear or reverse;
fig. 4
❒ use the handle A-fig. 2 to remove the
piece of stiff cover B; loosen the clamp-
ing device E-fig. 3;
❒ for versions with Fix&Go automatic or
take the tool kid from the luggage com-
partment;
❒ for versions with small spare wheel, un-
screw the retaining device E-fig. 3, take
the tool kit F, place near to the wheel
F0Q0392m
to be replaced and then take the small
spare wheel G;
❒ remove wheel hubcap H-fig. 4 (ver-
sions with steel rims) or remove the
hub cap (versions with alloy rims);
F0Q0393m
161