Philips 200WP7 User Manual page 33

Product Information
Downloaded from ManualMonitor.com Manuals
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/PRODUCT/product.htm (5 of 10)2006-08-04 11:01:33 AM
Pin
Signal Assignment
No.
1 T.M.D.S. Data2-
T.M.D.S. Data2+
2
3 T.M.D.S. Data2/4 Shield
4 No connect
5 No connect
DDC Clock
6
7 DDC Data
8 * Analog V-sync
2. The 15-pin D-sub connector (male) of the signal cable:
Pin
Assignment
No.
1 Red video input
2 Green video input/SOG
Blue video input
3
4 Ground
5 Cable detect
6 Red video ground
7 Green video ground
8 Blue video ground
Pin
Signal Assignment
No.
9 T.M.D.S. Data1-
T.M.D.S. Data1+
10
11 T.M.D.S. Data1/3 Shield
12 No connect
13 No connect
+5V Power
14
15 Ground (for +5V)
16 Hot Plug Detect
Pin
Assignment
No.
9 +5V
10 Logic ground
Ground
11
12 Serial data line (SDA)
13 H. Sync / H+V
14 V. Sync (VCLK for DDC)
15 Data clock line (SCL)
Pin
Signal Assignment
No.
17 T.M.D.S. Data0-
18 T.M.D.S. Data0+
19 T.M.D.S. Data0/5 Shield
20 No connect
21 No connect
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock+
24 T.M.D.S. Clock-