Philips 200WP7 User Manual page 14

Troubleshooting
Downloaded from ManualMonitor.com Manuals
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/SAFETY/saf_troub.htm (2 of 2)2006-08-04 11:01:16 AM
Vertical flicker appears
Horizontal flicker appears
The screen is too bright or too dark
An after-image appears
An after-image remains after the power
has been turned off.
Green, red, blue, dark, and white dots
remains
For further assistance, refer to the Consumer Information Centers
Press the Auto button.
Eliminate the vertical bars using the Phase/Clock of More
Settings in OSD Main Controls.
Press the Auto button.
Eliminate the vertical bars using the Phase/Clock of More
Settings in OSD Main Controls.
Adjust the contrast and brightness on OSD Main Controls.
(The backlight of the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker, please contact
your dealer).
If an image remains on the screen for an extended period of
time, it may be imprinted in the screen and leave an after-
image. This usually disappears after a few hours
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-
image will disappear after a peroid of time.
The remaining dots are normal characteristic of the liquid
crystal used in today's technology.
list and contact your local Philips distributor.
RETURN TO TOP OF THE PAGE